logo
Σπίτι
Προϊόντα
Περίπου εμείς
Γύρος εργοστασίων
Ποιοτικός έλεγχος
Μας ελάτε σε επαφή με
Ζητήστε ένα απόσπασμα
Ειδήσεις
TOGETHER HTL LTD
Αρχική Σελίδα Ειδήσεις

How Can the Right Rubber Hardness Improve Traction and Prevent Film Slippage?

Η TOGETHER HTL LTD είναι μια πολύ καλή εταιρεία, είμαι πολύ πρόθυμος να συνεργαστώ μαζί σας, ασφαλής, αποτελεσματική, επαγγελματική, ειλικρινής, χαρούμενη! Σας ευχαριστώ που μου παρέχετε σταθερή εξυπηρέτηση και προϊόντα. -----EUROPAT

—— EUROPT ΒΙΟΜΗΧΑΝΙΚΌ

Είμαι Online Chat Now
επιχείρηση Ειδήσεις
How Can the Right Rubber Hardness Improve Traction and Prevent Film Slippage?
τα τελευταία νέα της εταιρείας για How Can the Right Rubber Hardness Improve Traction and Prevent Film Slippage?

Film slippage is a common problem in plastic film production and continuous web-handling applications. It can cause unstable film movement, wrinkles, tension fluctuations, poor winding quality, and production interruptions.

One important factor affecting traction is the hardness of the rubber roller covering.

Rubber hardness influences how the roller deforms under pressure and how its surface contacts the film. A suitable hardness can help maintain stable contact conditions, while an unsuitable specification may contribute to slippage or other mechanical problems.

However, softer rubber does not automatically provide better traction. The correct hardness depends on film material, film thickness, roller diameter, nip pressure, production speed, rubber compound, and operating temperature.

1. Why Does Rubber Hardness Matter for Film Traction?

Rubber rollers are widely used in plastic film production lines for pulling, feeding, guiding, pressing, and conveying film.

When a rubber roller contacts the film, the covering deforms under the applied load. This deformation influences the contact area and pressure distribution between the roller and film.

Under comparable conditions, softer rubber generally deforms more than harder rubber. This may allow the roller surface to conform more closely to the film and help distribute pressure.

However, actual traction also depends on the friction characteristics of the rubber and film surfaces.

A suitable roller specification should therefore consider both contact behavior and the mechanical properties of the rubber compound.

2. What Happens When Rubber Hardness Is Too High?

If the rubber covering is too hard for the application, it may not deform sufficiently under the available nip load.

Possible problems include:

  • Insufficient conformity to the film surface

  • Limited contact under certain loading conditions

  • Uneven contact across the roller width

  • Greater sensitivity to roller alignment

  • Insufficient traction under some operating conditions

If film slippage occurs despite apparently correct nip pressure, the rubber hardness and surface condition should be checked.

However, other causes such as worn rubber, contamination, incorrect alignment, and unstable web tension should also be investigated.

3. What Happens When Rubber Hardness Is Too Low?

A very soft rubber covering can deform more easily, but excessive deformation may create additional problems.

These may include:

  • Excessive compression under nip pressure

  • Increased rolling resistance

  • Heat buildup during continuous operation

  • Faster wear under unsuitable conditions

  • Changes in effective roller diameter

  • Reduced dimensional stability

These issues can become more important at higher production speeds.

The objective is to select a hardness that provides sufficient contact conformity without sacrificing the mechanical stability required by the production line.

4. Understanding Shore A Hardness

Rubber hardness is commonly measured using the Shore A scale.

A lower Shore A value indicates softer rubber, while a higher value indicates harder rubber.

For film-handling rollers, Shore A hardness influences the amount of deformation under applied pressure.

However, hardness does not directly determine the coefficient of friction between rubber and film.

Two rubber compounds with the same Shore A hardness may have different friction characteristics, elasticity, abrasion resistance, and heat resistance.

Therefore, hardness should be evaluated together with:

  • Rubber compound formulation

  • Elasticity and resilience

  • Friction characteristics

  • Abrasion resistance

  • Covering thickness

  • Roller diameter

  • Nip pressure

  • Operating temperature

  • Production speed

There is no universal Shore A value suitable for every plastic film production line.

5. Consider Film Material and Thickness

Different polymer films have different surface and mechanical characteristics.

Common materials include:

  • BOPP film

  • BOPET film

  • PE film

  • CPP film

  • Other specialty polymer films

The same rubber roller specification may not provide identical traction performance with every film material.

Film thickness is also important. Thin films may be more sensitive to local pressure, stretching, marking, and deformation.

For this reason, rubber hardness and nip pressure should be evaluated together rather than independently.

A pulling roller used for thin BOPET film may require a different specification from a roller handling thicker PE film.

The actual selection should follow the film characteristics and the function of the roller position.

6. Rubber Compound and Surface Finish

Rubber compound selection is another important part of traction control.

Common covering materials include:

NBR rubber: Often considered for applications involving oils and selected industrial fluids.

EPDM rubber: Commonly considered for water, steam, and certain chemical environments.

Polyurethane: Often selected where abrasion resistance and mechanical strength are important.

Silicone rubber: May be considered for applications requiring particular temperature characteristics.

These are general material tendencies. Actual compatibility and performance depend on the compound formulation and operating conditions.

Surface finish also influences contact behavior. Depending on the film and roller function, a ground or textured rubber surface may be considered.

Hardness, compound formulation, and surface finish should be treated as parts of one roller specification.

7. How to Troubleshoot Film Slippage

When film slippage occurs, changing rubber hardness should not be the only adjustment.

A systematic inspection should include:

  1. Measure the actual rubber hardness and compare it with the specified value.

  2. Inspect the roller surface for wear, contamination, glazing, or damage.

  3. Check nip pressure and pressure distribution across the working width.

  4. Verify roller parallelism and alignment.

  5. Check web tension and line speed stability.

  6. Confirm that the rubber compound is suitable for the film and operating environment.

  7. Inspect bearings, drive components, and synchronization.

It is also important to understand when slippage occurs.

Does it happen during acceleration? Does it appear only at higher speeds? Does it occur during winding? Is it limited to one side of the film?

These details help determine whether the issue is related to traction, tension control, drive synchronization, or roller condition.

8. Information Required for a Customized Rubber Roller

When requesting a new or replacement rubber roller, prepare the following information:

  • Machine manufacturer and model

  • Roller position and working function

  • Roller diameter and face length

  • Overall length and shaft dimensions

  • Core material

  • Rubber compound, if known

  • Required Shore A hardness

  • Rubber covering thickness

  • Film material and thickness

  • Operating speed

  • Nip pressure or loading method

  • Operating temperature

  • Existing roller drawing or sample

If the existing roller is causing film slippage, describe the problem and the operating conditions when it occurs.

This information helps evaluate whether the specification needs to change in terms of hardness, compound, surface finish, or another mechanical parameter.

9. Customized Rubber Rollers from HUATAO Group

HUATAO Group focuses on industrial products and works closely with qualified manufacturers to coordinate customized roller supply for plastic film, paper, printing, and converting industries.

Our product scope includes Rubber Rollers, Cooling Rolls, and other industrial roller solutions.

For film-handling applications, rubber hardness, compound formulation, covering thickness, surface finish, and roller dimensions should be evaluated together.

A pulling roller, guide roller, and pressure roller may require different specifications even when they are installed on the same production line.

For more information, explore:

  • About HUATAO

  • Other Industrial Rolls

  • Polyfilm Line Rolls

  • Industrial Roller Covers

Whether you need a replacement rubber roller or a customized roller for a new film production line, providing the original drawing and application details is the best starting point.

Contact

Tony Liu
General Manager | International Department
HUATAO Group
Mobile / WhatsApp / WeChat: +86 13383112591
Email: sale08@huataogroup.com
Website: https://www.huataorolls.com/

Tags:

Rubber Roller Hardness, Film Slippage, Film Traction, Shore A Hardness, Rubber Rollers, Plastic Film Production, BOPP Film, BOPET Film, PE Film, Film Pulling Roller, Industrial Rubber Rollers, Rubber Compound, Roller Surface Finish, Web Handling, Nip Pressure, Film Tension, Polyfilm Line, Custom Rubber Rollers, Industrial Roller Supplier, HUATAO Group

Χρόνος μπαρ : 2026-11-15 17:45:41 >> κατάλογος ειδήσεων
Στοιχεία επικοινωνίας
TOGETHER HTL LTD

Υπεύθυνος Επικοινωνίας: Mr. Maple

Τηλ.:: +86 17778255675

Φαξ: 86--311-80690567

Στείλετε το ερώτημά σας απευθείας σε εμάς (0 / 3000)